Stable AOSP M For Infinix Note 3 (Kernel 3.18.x)

Stable AOSP M For Infinix Note 3 (Kernel 3.18.x)

The Fresh and Beautiful Rom For Mediatek devices is here. This is Pure AOSP Custom Rom for Infinix Note 3 & other Mediatek MT6753 Android chipset running devices. AOSP stands for Android Open Source Project and is the stock Rom of every device which was assembled and designed by the Mobile Manufacturers. You’ll get all of the exclusive features of Android Marshmallow like Enhanced Doze mode and other stuff. This is a very stable ROM. If interested in Android 6.0 for other phones, check out our new Custom ROMs section. Stock and official firmware are always good, but custom ROMs make them better with new features and lots of system tweaks that are not otherwise possible. This is clearly one of the advantages of rooting your Android phone (read: Benefits of Rooting an Android Device). You can update Mediatek MT67xx devices to Android 6.0 Pure AOSP Marshmallow custom firmware using the tutorial below. This is not an official release by LG/Google, but just a custom ROM which would require a custom recovery like Carliv Touch Recovery or TWRP Recovery and your phone must be rooted in order to flash the ROM zip and Google Apps zip files on your phone.
Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We ( or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉
Table of Contents

    About Pure AOSP 6.0.1 Rom

    This amazing AOSP custom ROM comes with tons of new features and is based on Android 6.0 Marshmallow. There are tons of useful articles and how-to guides on Droidadda for the custom roms, but i think you might be interested in the Mediatek Devices right now. Therefore i bring this rom for you all.
    Thanks to Dennis M Wachira for providing me this Awesome Rom.
    Like this Pure AOSP Rom based on the latest Android 6.0? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

    Rom Features


    • Bluetooth, Hotspot, Gapps, GPS, Video Playback, Camera, FM, 2G/3G Toggle, Ril, Autorotation, USSD, Data, Youtube Streaming & 720p Playback, HD videos in Gallery, Multiuser, 2G/3G Toggles & Network Mode, VPN, GPS


      • Viper4Droid, Ni-Fy, Gapps, FM, Xposed, Nexus Launcher, Screen Recorder, 4 column tiles, Navigation bar like stock XOS, 3 Minit Battery, Android N-like settings & Notifications, Google Messages, Substratum, Xperia Music


      • Performance Tuning, Audio Effects, Sound Mods, Extreme Battery, Network stability


      • QS added, Safe Browsing mode, Bloatwares removed, Fully Deodexed & Lots more to discover !!


        • Not reported yet! 


            Download the Most stable Pure AOSP 6.0.1 For Infinix Note 3 ever from the below link along with several files.

            Flashing Instructions

            1. Download Rom and copy to SD Card
            2. Reboot into TWRP Recovery
            3. Go to Wipe Option in TWRP
            4. Go to Advanced Format option
            5. Choose cache ,Data ,System and Dalvik cache partition and swipe for Formatting.
            6. Flash ROM = wait until finish
            7. First time boot after flashing takes time. Please be Patienced. 


            Click me

            Preparation Steps

            • Use this post only with the MT6582 devices.
            • Do not use this post for any other different Android devices.
            • For the ‘how-to’ guide to be completed successfully you will need to have a rooted device and a custom ROM has to be installed on it.
            • The installed custom Recovery has to be TWRP Recovery. No other different Custom Recovery works with the Pure AOSP Android 6.0.x installation.
            • Make sure that the installed TWRP build is the latest one, so that it will support the new Android 6.0.x custom ROM installations.
            • In the ‘how-to’ part of this post you can find two extra preparation steps: the NANDROID Backup and the Factory Reset ones.
            • The NANDROID Backup creates a full restore point for your device, one that you can use in case the new custom ROM doesn’t work with your phone.
            • The Factory Reset process wipes clean the system partition, but it won’t delete any data files from the internal storage.
            • Factory Resetting the device means that the old custom ROM will be removed completely for the new Pure AOSP Android 6.0.x Custom ROM to boot successfully.
            • In case you have to save any data from installed applications, then you should use the Helium app.
            • Use the tutorial only if you are an advanced user. We cannot be blamed in case you brick the phone nor in case you lose any data in the process.
            • Read the entire tutorial first and make sure that you won’t be skipping any steps.
            • Check the battery charge level of your device and make sure that it is over 50%, as it will prevent the phone from switching off during installation.
            • Now that you know all of the above you can continue to the next part of this post.

            How to Update Your MT6753 Device to AOSP  M ROM:

            1. Download the AOSP  M from link below
            2. Download Gapps for Android 6.0.x from here. link below.
            3. Transfer both zip files on your phone’s internal storage.
            4. After the files are copied you can disconnect the phone from PC.
            5. Do not unzip the files.
            6. Power off your phone.
            7. Now boot it in TWRP Recovery Mode.
            8. First thing that you have to do using the Recovery Options is to create the NANDROID Backup of the already installed ROM:
            9. Select the ‘backup’ options.
            10. Set a name for this file and confirm process.
            11. Start the ‘factory reset’ process:
            12. Select ‘wipe’ option and confirm.
            13. Now you can begin the Pure AOSP installation:
            14. Select ‘install’ and find the Custom Rom zip file and load it.
            15. Confirm the flashing process and wait until the Custom Rom is done installing.
            16. Install the Gapps zip using the same steps above after the Rom is flashed.
            17. When all files are done installing you can reboot your smartphone in normal mode. 

            Device Info

            Rom Info Details
            Device  Note 3 –  X601
            Manufacturer Infinix
            Chipset MT6753
            SDK 23

            FAQ & ADVICES
            1. Rom Take Long Time First Boot (5-7 minutes).
            2. After First Boot, Reboot your Device To see everything is okay.
            3. I Strongly Advise You, To Use Xposed Tools, Will Help You For Many Many Customization.
            4. If you have installing flyme tools open the app then go to framework look to (Pocket Mode) and disable it, because this have automatically enabled ( If enable sensor will always working and maybe get drain battery)


            • Dennis M Wachira
            • Syed Ahmed
            • Android HQ+PC
            • Mediatek Dev’s
            • You all for testing

            Sorry if i missed someone, because on the facebook page only 2 namesa are given as credits. Please inform me if anyone also contributed this project. I will update the credit section after your feedback.

              Final Words

              Note: The installation process of this new ROM is going to take a while. Also, the first boot process should take at least 10 minutes before it loads all the new files.

              Link For You:  For More Custom Roms Visit here. If you need any extra help completing this guide, then you should tell us in comments. If installation fails, then the only thing that you need to do is to try and repeat the whole tutorial more than once.

              Thankyou for visiting Droidadda. For fast access to our service Bookmark & Subscribe us now. Share this article with your friends and show how they can customize WhatsApp. If any issues then feel free to comment below. Peace out.


              via Blogger


              Leave a Reply

              Please log in using one of these methods to post your comment:


              You are commenting using your account. Log Out / Change )

              Twitter picture

              You are commenting using your Twitter account. Log Out / Change )

              Facebook photo

              You are commenting using your Facebook account. Log Out / Change )

              Google+ photo

              You are commenting using your Google+ account. Log Out / Change )

              Connecting to %s