Stable Nitrogen OS 6.0.1 For Mediatek MT6582 Devices

Nitrogen OS For Mediatek MT6582 Devices

The Fresh and Beautiful Rom For Mediatek devices is here. This is Nitrogen OS Custom Rom for Mediatek Android running devices. You’ll get all of the exclusive features of Android Marshmallow like Enhanced Doze mode and other stuff. This is a very stable ROM. If interested in Android 6.0 for other phones, check out our new Custom ROMs section. Stock and official firmware are always good, but custom ROMs make them better with new features and lots of system tweaks that are not otherwise possible. This is clearly one of the advantages of rooting your Android phone (read: Benefits of Rooting an Android Device). You can update Mediatek MT65xx devices  to Android 6.0 NitogenOS Nougat custom firmware using the tutorial below. This is not an official release by LG/Google, but just a custom ROM which would require a custom recovery like Carliv Touch Recovery or TWRP Recovery and your phone to be rooted in order to flash the ROM zip and Google Apps zip files on your phone.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We ( or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial 😉

Rom Features


Android 7.0 NitogenOS Nougat ROM Details:

This amazing NitogenOS custom ROM comes with tons of new features and is based on Android 6.0 Nougat. There are tons of useful articles and how-to guides on Team Android for the LG Nexus 4, but we think you might be interested in the Mediatek Devices right now:
Thanks to Tirth Patel for providing us this Awesome Rom.
Like this NitogenOS ROM based on the latest Android 6.0? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.


  • Source Bugs (Switch / Vpn)


Flashing Instructions

  1. Download Rom and copy to SD Card
  2. Reboot into TWRP Recovery
  3. Go to Wipe Option in TWRP
  4. Go to Advanced Format option
  5. Choose cache ,Data ,System and Dalvik cache partition and swipe for Formatting.
  6. Flash ROM = wait until finish
  7. First time boot after flashing takes time. Please be Patienced. 

Preparation Steps

  • Do not use this post for any other different Android devices.
  • For the ‘how-to’ guide to be completed successfully you will need to have a rooted device and a custom ROM has to be installed on it.
  • The installed custom Recovery has to be TWRP Recovery. No other different Custom Recovery works with the Nitrogen OS Android 6.0.x installation.
  • Make sure that the installed TWRP build is the latest one, so that it will support the new Android 6.0.x custom ROM installations.
  • In the ‘how-to’ part of this post you can find two extra preparation steps: the NANDROID Backup and the Factory Reset ones.
  • The NANDROID Backup creates a full restore point for your device, one that you can use in case the new custom ROM doesn’t work with your phone.
  • The Factory Reset process wipes clean the system partition, but it won’t delete any data files from the internal storage.
  • Factory Resetting the device means that the old custom ROM will be removed completely for the new Nitrogen OS Android 6.0.x Custom ROM to boot successfully.
  • In case you have to save any data from installed applications, then you should use the Helium app.
  • Use the tutorial only if you are an advanced user. We cannot be blamed in case you brick the phone nor in case you lose any data in the process.
  • Read the entire tutorial first and make sure that you won’t be skipping any steps.
  • Check the battery charge level of your device and make sure that it is over 50%, as it will prevent the phone from switching off during installation.
  • Now that you know all of the above you can continue to the next part of this post.

Fixes & Workarounds By Tirth Patel

    VPN Connection For WiFi

    1. Download psiphon from playstore and open it, choose Browser-Only mode don’t tunnel whole device.
    2. Go to its logs tab and check the port of http proxy.
    3. Now open WiFi setting and long press to your WiFi network (from which u are connected) go to modify tab and from check the advanced options.
    4. Chosen manual proxy option and put host name as and port as the no. which you noted in step 2 ( Like 8080,etc ) and click save .

    For Cellular Data-

    1. Download psiphon from playstore and open it, choose Browser-Only mode don’t tunnel whole device.
    2. Go to its logs tab and check the port of http proxy.
    3. Now open Setting>Sim cards>Sim 1/Sim 2 settings/Access Points Names and click on Connected APN
    4. In Proxy put and port as the no. which you noted in step 2 ( Like 8080,etc ) and click save .

    How to Update Your MT6582 Device to Nitrogen OS ROM:

    1. Download the Nitrogen OS from link below
    2. Download Gapps for Android 6.0.x from here. link below.
    3. Transfer both zip files on your phone’s internal storage.
    4. After the files are copied you can disconnect the phone from PC.
    5. Do not unzip the files.
    6. Power off your phone.
    7. Now boot it in TWRP Recovery Mode.
    8. First thing that you have to do using the Recovery Options is to create the NANDROID Backup of the already installed ROM:
    9. Select the ‘backup’ options.
    10. Set a name for this file and confirm process.
    11. Start the ‘factory reset’ process:
    12. Select ‘wipe’ option and confirm.
    13. Now you can begin the Nitrogen OS installation:
    14. Select ‘install’ and find the Custom Rom zip file and load it.
    15. Confirm the flashing process and wait until the Custom Rom is done installing.
    16. Install the Gapps zip using the same steps above after the Rom is flashed.
    17. When all files are done installing you can reboot your smartphone in normal mode. 

    Device Info

        Device    : Mediatek MT6582
         Android : 6.0.1
         SDK       : 23
         Kernel    :  3.4.67
         Chipset  :  MT6582


    • Nitrogen OS Team
    • XYYX
    • Tirth Patel
    • Sunmughan Swamy
    • Fire855
    • Droidadda
    • Mediatek Dev’s
    • You all for testing

    Final Words

    Note: The installation process of this new ROM is going to take a while. Also, the first boot process should take at least 10 minutes before it loads all the new files.
    If you need any extra help completing this guide, then you should tell us in comments. If installation fails, then the only thing that you need to do is to try and repeat the whole tutorial more than once.

    via Blogger


    Leave a Reply

    Please log in using one of these methods to post your comment: Logo

    You are commenting using your account. Log Out / Change )

    Twitter picture

    You are commenting using your Twitter account. Log Out / Change )

    Facebook photo

    You are commenting using your Facebook account. Log Out / Change )

    Google+ photo

    You are commenting using your Google+ account. Log Out / Change )

    Connecting to %s