Acer Liquid Zest Rom For Walton Primo GH6/GH6+

ROM FEATURES

  • Ultra stylish smooth UI
  • Built in Screen recorder
  • All navigation key working
  • HD walpaper
  • Dolby atoms
  • Acer game zone
  • Pi music player
  • Fully OTG support
  • Add away
  • Recent apps panel
  • Ultimate gaming experience with DND mode
  • Special camera features
  • FM radio working
  • Bluelight Shield

DOWNLOADS

Acre Liquid Zest Rom Gapps

SCREENSHOTS

Image may contain: text

 PREREQUISITES

  • Smooth UI
  • Works Everything
  • All feature of Acer are included

DISCLAIMER

  1. This Android 6.0.1 ROM is meant for only Walton GH6 and GH6+
  2. Your phone should have a custom recovery installed to install this ROM on your phone.
  3. Ensure you have installed TWRP Recovery 
  4. This ROM will wipe out all your data. Make sure you backup all your data in your phone before proceeding. 
  5. Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.
  6. Don’t worry we are going to share step by step guide to safely

How To Flash The Acer Liquid Zest For Walton Primo GH6 and GH6+

This site or the developers are not responsible if you damage or brick your device.Do it at your own risk and follow the instruction correctly.
  1. Download Acer Liquid Zest ROM to your computer or Phone from the link below
  2. If downloaded with computer connect your device via USB and send to the root of your Sd, or you downloaded the ROM with your device move the downloaded SAcer Liquid Zest to the root of your Sd card.
  3. Switch Off your device.
  4. Now  Boot into Recovery Mode.
  5. Once you in Twrp Recovery Mode, click on “Backup” Tick all the option then slide the Swipe to Backup button to start the backing-up your previous Rom (Very Important).
  6. After The Backup Process is done go to the main menu click on “Wipe” then click on “Advance Wipe” Now tick this option Dalvik, System, Cache, and Data.
  7. Slide the “Swipe to Wipe” button to starting the wiping process.
  8. Now click Install select the Acer Liquid Zest ROM.
  9. Tick✔ the option “Reboot after installation is complete” After the ROM is done installing it will reboot itself.
First boot will take about 5 minutes to boot up. So be patience !
After the boot up is done Your  Walton Primo GH6 & GH6+ Should now have the Acer Liquid Zest ROM Installed on it.

Rom Info

Device: Walton Primo GH6
Kernel: 3.18.19+
Chipset: MT6580

Credits and Thanks

    Kbd Md Rasel
    Specially i10
    6580 Developer Team
    Xclusivetek
ROM Feature

  • Smooth UI
  • Works Everything
  • All feature of Acer are included



Prerequisites:

  • This Android 6.0.1 ROM is meant for only Walton GH6 and GH6+
  • Your phone should have a custom recovery installed to install this ROM on your phone.
  • Ensure you have installed TWRP Recovery 
  • This ROM will wipe out all your data. Make sure you backup all your data in your phone before proceeding.
  • Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.
  • Don’t worry we are going to share step by step guide to safely



Disclaimer:
This site or the developers are not responsible if you damage or brick your device.Do it at your own risk and follow the instruction correctly.


How To Flash The Acer Liquid Zest For Walton Primo GH6 and GH6+

  1. Download Acer Liquid Zest ROM to your computer or Phone from the link below
  2. If downloaded with computer connect your device via USB and send to the root of your Sd, or you downloaded the ROM with your device move the downloaded SAcer Liquid Zest to the root of your Sd card.
  3. Switch Off your device. 
  4. Now  Boot into Recovery Mode.
  5. Once you in Twrp Recovery Mode, click on “Backup Tick all the option then slide the Swipe to Backup button to start the backing-up your previous Rom (Very Important).
  6. After The Backup Process is done go to the main menu click on “Wipe” then click on “Advance Wipe” Now tick this option Dalvik, System, Cache, and Data.
  7. Slide the “Swipe to Wipe” button to starting the wiping process.
  8. Now click Install select the Acer Liquid Zest ROM.
  9. Tick✔ the option “Reboot after installation is complete” After the ROM is done installing it will reboot itself.
  10. First boot will take about 5 minutes to boot up. So be patience

  11. After the boot up is done Your  Walton Primo GH6 & GH6+ Should now have the Acer Liquid Zest ROM Installed on it.

    Please do share this post with your friends on Facebook, Google + and Twitter

Credits and Thanks

  • Kbd Md Rasel
  • Specially i10
  • 6580 Developer Team  
  • Xclusivetek

– See more at: http://www.xclusivetek.com/2016/12/acer-liquid-zest-custom-rom-for-walton.html#sthash.lMNEA5cv.dpuf

ROM Feature

  • Smooth UI
  • Works Everything
  • All feature of Acer are included



Prerequisites:

  • This Android 6.0.1 ROM is meant for only Walton GH6 and GH6+
  • Your phone should have a custom recovery installed to install this ROM on your phone.
  • Ensure you have installed TWRP Recovery 
  • This ROM will wipe out all your data. Make sure you backup all your data in your phone before proceeding.
  • Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.
  • Don’t worry we are going to share step by step guide to safely



Disclaimer:
This site or the developers are not responsible if you damage or brick your device.Do it at your own risk and follow the instruction correctly.


How To Flash The Acer Liquid Zest For Walton Primo GH6 and GH6+

  1. Download Acer Liquid Zest ROM to your computer or Phone from the link below
  2. If downloaded with computer connect your device via USB and send to the root of your Sd, or you downloaded the ROM with your device move the downloaded SAcer Liquid Zest to the root of your Sd card.
  3. Switch Off your device. 
  4. Now  Boot into Recovery Mode.
  5. Once you in Twrp Recovery Mode, click on “Backup Tick all the option then slide the Swipe to Backup button to start the backing-up your previous Rom (Very Important).
  6. After The Backup Process is done go to the main menu click on “Wipe” then click on “Advance Wipe” Now tick this option Dalvik, System, Cache, and Data.
  7. Slide the “Swipe to Wipe” button to starting the wiping process.
  8. Now click Install select the Acer Liquid Zest ROM.
  9. Tick✔ the option “Reboot after installation is complete” After the ROM is done installing it will reboot itself.
  10. First boot will take about 5 minutes to boot up. So be patience

  11. After the boot up is done Your  Walton Primo GH6 & GH6+ Should now have the Acer Liquid Zest ROM Installed on it.

    Please do share this post with your friends on Facebook, Google + and Twitter

Credits and Thanks

  • Kbd Md Rasel
  • Specially i10
  • 6580 Developer Team  
  • Xclusivetek

– See more at: http://www.xclusivetek.com/2016/12/acer-liquid-zest-custom-rom-for-walton.html#sthash.lMNEA5cv.dpuf

ROM Feature

  • Smooth UI
  • Works Everything
  • All feature of Acer are included



Prerequisites:

  • This Android 6.0.1 ROM is meant for only Walton GH6 and GH6+
  • Your phone should have a custom recovery installed to install this ROM on your phone.
  • Ensure you have installed TWRP Recovery 
  • This ROM will wipe out all your data. Make sure you backup all your data in your phone before proceeding.
  • Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.
  • Don’t worry we are going to share step by step guide to safely



Disclaimer:
This site or the developers are not responsible if you damage or brick your device.Do it at your own risk and follow the instruction correctly.


How To Flash The Acer Liquid Zest For Walton Primo GH6 and GH6+

  1. Download Acer Liquid Zest ROM to your computer or Phone from the link below
  2. If downloaded with computer connect your device via USB and send to the root of your Sd, or you downloaded the ROM with your device move the downloaded SAcer Liquid Zest to the root of your Sd card.
  3. Switch Off your device. 
  4. Now  Boot into Recovery Mode.
  5. Once you in Twrp Recovery Mode, click on “Backup Tick all the option then slide the Swipe to Backup button to start the backing-up your previous Rom (Very Important).
  6. After The Backup Process is done go to the main menu click on “Wipe” then click on “Advance Wipe” Now tick this option Dalvik, System, Cache, and Data.
  7. Slide the “Swipe to Wipe” button to starting the wiping process.
  8. Now click Install select the Acer Liquid Zest ROM.
  9. Tick✔ the option “Reboot after installation is complete” After the ROM is done installing it will reboot itself.
  10. First boot will take about 5 minutes to boot up. So be patience

  11. After the boot up is done Your  Walton Primo GH6 & GH6+ Should now have the Acer Liquid Zest ROM Installed on it.

    Please do share this post with your friends on Facebook, Google + and Twitter

Credits and Thanks

  • Kbd Md Rasel
  • Specially i10
  • 6580 Developer Team  
  • Xclusivetek

– See more at: http://www.xclusivetek.com/2016/12/acer-liquid-zest-custom-rom-for-walton.html#sthash.lMNEA5cv.dpuf

via Blogger http://www.droidadda.org/2017/02/acer-liquid-zest-rom-for-walton-primo.html https://mtkdr0id.files.wordpress.com/2017/02/9853e-acer-liquid-zest-plus-3.jpg?w=300

Advertisements

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s